Teague Taper Choke Key

Safe and easy way to remove Teague Flush Fitting chokes - advice from the manufacturer below:

a.  When removing and inserting choke tubes ensure the shotgun is unloaded.

b.  At all times ensure the choke tubes are fully seated. Tighten with the Teague Taper Key.

c.  After and on the same day of use, your chokes should be removed and cleaned. Check to ensure that no      damage has occurred i.e. if accidentally dropped. The inside of the barrels should also be cleaned      thoroughly and with particular attention to the counterbore and the threaded location for the choke tube.

d.  Prior to assembly of the choke tube, apply Choke Lube to the thread, ensure surplus lubricant is removed.

e.  DO NOT fire shotgun without choke tubes installed.